Composite material

The example of processing of composite material of Wired Co., Ltd. is posted.

2023/7/4 / Last updated : 2023/9/12 wired
Composite materialLaser processing exampleMetalRoll to Roll

Laser cut shapes in any shape! Example 2: Half-cut on composite materials

Half-cutting is performed by cutting only Al foil of Al foil + PET laminate composite material to secure the shape. The desired shape can be continuously processed while the base material is conveyed roll-to-roll. We are capable of processing not only Al foil but also Cu foil and other composite materials and can manage a wide variety of materials and shapes. Damage to the PET material due to laser half-cutting is not a concern.
2022/10/7 / Last updated : 2023/9/21 wired
Composite materialLaser processing examplematerialMetalResin

The latest laser high-speed decorative technology for laser and roll-to-roll production

Laser hole processing technology for roll-conveyed film has been considered a difficult technology because the optical scanning technology of the laser cannot keep up with the conveyor speed. Following the establishment of the converting high-speed laser technology with the GHS® scanner, WIRED has established the technology for drawing on films conveyed at high speed. Icons can now be clearly expressed with dots punched into the film conveyed at high speed.
枚葉レーザーによるLIB正極へのレーザー穴あけ加工事例 ㈱ワイヤード
2020/9/8 / Last updated : 2024/6/7 wired
Composite materialLaser processing exampleSheet Laser

Example of laser drilling on LIB positive electrode by sheet laser machining machine

Introduces examples of drilling holes in the LIB positive electrode using a sheet laser machine.
The LIB positive electrode (t = 130 μm) was machined with a hole diameter of 12 μm, a pitch of 110 μm (parallel), and an aperture ratio of 0.9%.
Processing with a roll-to-roll laser processing machine is also possible. WIRED Co., Ltd.
枚葉レーザーによるLIB負極へのレーザー穴あけ加工事例 ㈱ワイヤード
2020/9/8 / Last updated : 2021/5/23 wired
Composite materialLaser processing examplematerialSheet Laser

Example of laser drilling in LIB negative electrode by sheet laser machining machine

Introduces examples of drilling holes in the LIB negative electrode using a sheet laser machine.
The LIB negative electrode (t = 130 μm) was machined with a hole diameter of 16 μm, a pitch of 110 μm (parallel), and an aperture ratio of 1.5%.
Processing with a roll-to-roll laser processing machine is also possible. WIRED Co., Ltd.