ロールtoロールでレーザー高速微細穴加工受託・レーザー加工機制作

Sheet Laser

We have posted an example of processing by a single-wafer laser processing machine of Musashi WIRED Co., Ltd.

2021/10/20 / Last updated : 2021/10/30 wired

Composite materialLaser processing exampleSheet Laser

Laser welding case to laminated film

This page introduces examples of laser welding to laminated films.
There are various methods for welding, but I thought that if laser welding could be done, it would be possible to make small parts as well. WIRED Co., Ltd.

2021/7/6 / Last updated : 2021/9/8 wired

Laser processing exampleMetalSheet Laser

Example of grooving to tungsten (W)

This is an introduction of counterbore (non-penetrating) processing examples for tungsten (W).
Machining was performed with a groove width of 50 μm and a depth of 25 μm. Wired Co., Ltd.

2021/7/6 / Last updated : 2021/9/7 wired

Laser processing exampleMetalSheet Laser

Example of shape processing to zirconia

Introduction of shape processing examples for zirconia (ZrO2)
Zirconia (ZrO2) 50 μm was cut into a 1 mm square.
WIRED.Co., Ltd.

Counterbore (unfinished) processing to SUS with laser

2021/6/21 / Last updated : 2021/6/21 wired

Laser processing examplematerialMetalSheet Laser

Example of counterbore (non-penetrating) processing on SUS

This is an introduction of counterbore (non-penetrating) processing examples to SUS304 (t = 0.3 mm) by laser.
Processing was performed with an incident diameter of 500 μm and a depth of 215 μm. WIRED Co., Ltd.

Narrow pitch (through hole) machining example for SUS_exit plane view

2021/6/21 / Last updated : 2021/6/21 wired

Laser processing examplematerialMetalSheet Laser

Narrow pitch machining example for SUS

Through holes with an output diameter of 8 μm (incident diameter of about 20 μm) and a pitch of 60 μm were machined on SUS 0.02 mm.
At the visual level, distortion could be confirmed. Wired Co., Ltd.

Grooving example for SUS: Wired Co., Ltd.

2021/5/26 / Last updated : 2021/6/9 wired

Laser processing examplematerialMetalSheet Laser

Example of grooving to SUS

This is an introduction page of grooving examples for SUS304. Wired Co., Ltd.

Silicone rubber after surface processing with laser (water repellent effect): WIRED Co., Ltd.

2021/5/26 / Last updated : 2021/11/15 wired

Laser processing examplematerialResinSheet Laser

Example of water-repellent effect on silicone rubber by nanosecond pulse laser

This is an introduction page of laser microfabrication examples that are expected to have a water-repellent effect on silicone rubber by nanosecond lasers. Wired Co., Ltd.

Example of processing into titanium (Ti) foil

2021/3/25 / Last updated : 2021/5/23 wired

Laser processing examplematerialMetalSheet Laser

Example of through-hole machining of titanium (Ti foil) with a single-wafer laser machining machine

This is an introduction of a laser through-hole machining example of Φ45 μm, pitch 500 μm (parallel type), and aperture ratio of 0.6% on a 12 μm thick titanium (Ti) foil using a single-wafer laser machining machine. Wired Co., Ltd.

Example of high aspect ratio laser penetration processing to SUS : Wired Co., Ltd.

2021/3/1 / Last updated : 2021/5/23 wired

Laser processing examplematerialMetalSheet Laser

Example of high aspect ratio laser penetration processing to SUS

This page introduces examples of laser through-hole machining with a high aspect ratio (7.5) for SUS. Wired Co., Ltd.

2020/9/8 / Last updated : 2021/5/23 wired

Laser processing exampleMetalSheet Laser

Example of drilling holes in aluminum (Al) foil using a sheet laser machine

Iintroduces examples of drilling holes in Al foil using a sheet laser machine. WIRED Co., Ltd.

採用情報はこちら RECRUIT

PAGE TOP