ロールtoロールでレーザー高速微細穴加工受託・レーザー加工機制作

material

2021/7/6 / Last updated : 2021/9/7 wired

Laser processing exampleMetalSheet Laser

Example of shape processing to zirconia

Introduction of shape processing examples for zirconia (ZrO2)
Zirconia (ZrO2) 50 μm was cut into a 1 mm square.
WIRED.Co., Ltd.

Counterbore (unfinished) processing to SUS with laser

2021/6/21 / Last updated : 2021/6/21 wired

Laser processing examplematerialMetalSheet Laser

Example of counterbore (non-penetrating) processing on SUS

This is an introduction of counterbore (non-penetrating) processing examples to SUS304 (t = 0.3 mm) by laser.
Processing was performed with an incident diameter of 500 μm and a depth of 215 μm. WIRED Co., Ltd.

Narrow pitch (through hole) machining example for SUS_exit plane view

2021/6/21 / Last updated : 2021/6/21 wired

Narrow pitch machining example for SUS

Through holes with an output diameter of 8 μm (incident diameter of about 20 μm) and a pitch of 60 μm were machined on SUS 0.02 mm.
At the visual level, distortion could be confirmed. Wired Co., Ltd.

Grooving example for SUS: Wired Co., Ltd.

2021/5/26 / Last updated : 2021/6/9 wired

Laser processing examplematerialMetalSheet Laser

Example of grooving to SUS

This is an introduction page of grooving examples for SUS304. Wired Co., Ltd.

Silicone rubber after surface processing with laser (water repellent effect): WIRED Co., Ltd.

2021/5/26 / Last updated : 2021/11/15 wired

Laser processing examplematerialResinSheet Laser

Example of water-repellent effect on silicone rubber by nanosecond pulse laser

This is an introduction page of laser microfabrication examples that are expected to have a water-repellent effect on silicone rubber by nanosecond lasers. Wired Co., Ltd.

Example of processing into titanium (Ti) foil

2021/3/25 / Last updated : 2021/5/23 wired

Laser processing examplematerialMetalSheet Laser

Example of through-hole machining of titanium (Ti foil) with a single-wafer laser machining machine

This is an introduction of a laser through-hole machining example of Φ45 μm, pitch 500 μm (parallel type), and aperture ratio of 0.6% on a 12 μm thick titanium (Ti) foil using a single-wafer laser machining machine. Wired Co., Ltd.

Example of high aspect ratio laser penetration processing to SUS : Wired Co., Ltd.

2021/3/1 / Last updated : 2021/5/23 wired

Laser processing examplematerialMetalSheet Laser

Example of high aspect ratio laser penetration processing to SUS

This page introduces examples of laser through-hole machining with a high aspect ratio (7.5) for SUS. Wired Co., Ltd.

ロールtoロールによるリチウムイオン電池の負極材料への高速レーザー穴あけ加工事例：(株)ワイヤード

2020/9/24 / Last updated : 2021/6/1 wired

Composite materialLaser processing exampleRoll to Roll

Example of high-speed laser drilling into negative electrodes for lithium-ion batteries by Roll to Roll

This page introduces examples of high-speed laser drilling of roll-to-roll laser processing machines to negative electrodes for lithium ions (t = 270 μm). Wired Co., Ltd.

2020/9/24 / Last updated : 2024/8/24 wired

Laser processing exampleResinRoll to Roll

Example of high-speed drawing (decoration) to acrylic (PMMA) film by roll-to-roll laser processing machine

By combining combating technology and laser processing technology, we have realized drawing processing to resin film by roll-to-roll laser processing machine. Wired Co., Ltd.

2020/9/24 / Last updated : 2021/5/23 wired

Laser processing exampleMetalRoll to Roll

Roll-to-roll drawing decoration (intermittent) processing example on aluminum (Al) foil

A roll-to-roll high-speed laser machining machine has realized drawing decoration (intermittent) processing on aluminum (Al) foil. WIRED Co., Ltd.

PAGE TOP