2021/6/21 / Last updated : 2021/6/21 wired
Laser processing exampleSheet LasermaterialMetal

Narrow pitch machining example for SUS

Narrow pitch (through hole) machining example for SUS_exit plane view
Narrow pitch (through hole) machining example for SUS (exit plane view) Output diameter 8 μm, pitch 60 μm
Narrow pitch (through hole) machining example for SUS Incident surface (microscope magnification: × 500)
Narrow pitch (through hole) machining example for SUS (incident plane view) Output diameter 8 μm, pitch 60 μm

This is an introduction of narrow pitch machining examples for SUS.
Through holes with an output diameter of 8 μm (incident diameter of about 20 μm) and a pitch of 60 μm were machined on SUS 0.02 mm.
At the visual level, distortion could be confirmed.

If you are interested in this technology, please feel free to contact us.

    お名前（必須）

    ふりがな（必須）

    メールアドレス（必須）

    電話番号（必須）

    住所

    職種（必須）

    雇用形態（必須）

    職務経歴（必須）

    志望動機・PR事項など（必須）

    应用

    我们期待一场精彩的相遇

    Categories
    Laser processing example, Sheet Laser, material, and Metal
    Tags
    Laser processing example

    Previous article

    Example of grooving to SUS
    2021/5/26
    Laser processing example

    Next article

    Example of counterbore (non-penetrating) processing on SUS
    2021/6/21