Relationship between opening conditions and reaction temperature and Li+ ion predorp velocity on the electrostatic foil in laminated graphite/perforated electrolyted foil negative electrodes
When the lithium iron phosphate (LiFePO4, LFP) positive electrode was drilled with a picosecond pulse laser, high-speed discharge could be maintained. WIRED Co., Ltd.
Study on Li Metal Deposition, SEI Formation on Anodes and Cathode Potential Change during the Pre-Lithiation Process in a Cell Prepared with Laminated Porous Anodes and Cathodes
The pre-doping of Li+ ions (pre-lithiation) in graphite anodes, which is needed to improve the initial charging/discharging efficiency of lithium ion batteries, was examined from the viewpoints of lithium metal deposition, surface electrolyte interface (SEI) formation and electrode potential changes in the cathode during the pre-lithiation. Using a cell composed of pre-laminated, through-holed anodes and cathodes, the anodes were pre-lithiated with the perpendicular pre-doping method, as explained in this work, which can effectively enhance the pre-lithiation process in laminated cells. In the pre-lithiation system, Li deposition was not observed on the anode surfaces during pre-lithiation, and the thickness of the SEI layers formed on the anodes did not increase. Moreover, the SEI layer has the same composition as that formed by the electrochemical lithiation (charging) process, even when the pre-lithiation of the anodes is accelerated by through-holes formed on the anode and cathode electrodes. In addition, the electrode potential of cathodes inserted between pre-lithiated anodes does not change during the pre-lithiation process, and the capacity of the cathodes does not degrade upon pre-lithiation. The perpendicular pre-doping method examined in this study is found to be applicable to the production process of lithium ion batteries with high charging/discharging efficiency. WIRED Co., Ltd.
Improvement of high-rate charging/discharging performance of a lithium ion battery composed of laminated LiFePO4 cathodes/ graphite anodes having porous electrode structures fabricated with a pico-second pulsed laser
To improve the fast charge / discharge performance of the laminated lithium iron phosphate (LiFePO4) positive / graphite negative electrode cells, a picosecond pulsed laser was used to form micrometer-sized through holes on the electrode surface. Wired Co., Ltd.
Relationship between Hole Design on Anode Electrode, the Reaction Temperature and the Rate of Li+ Ion Pre-doping Reaction to Porous Laminated Graphite Anodes
In recent years, in order to improve the performance of secondary batteries, it is strongly desired to improve the charge / discharge capacity of lithium-ion secondary batteries (LIBs) and the performance of sulfur batteries and air batteries, which are considered to be next-generation batteries, to the practical level. It is rare. While various materials are being developed, we believe that it is necessary to establish a lithium ion (Li +) pre-doping method as a basic technology to take the performance of such current secondary batteries to the next step. ing. Wired Co., Ltd.
Improvement of Rate Performance of LiFePO4 Cathode with Porous LiFePO4/Activated Carbon Hybrid Electrode Structure
The electrodes produced by forming an LFP layer and an AC layer on each side of the Al current collector foil and then drilling through holes with a laser have a higher discharge capacity at higher current densities than conventional electrodes without holes. It was clarified that the decrease was small and the discharge capacity retention rate was high. Wired Co., Ltd.
Fabrication of Porous Graphite Anodes with Pico-Second Pulse Laser and Enhancement of Pre-Doping of Li+ Ions to Laminated Graphite Anodes with Micrometre-Sized Holes Formed on the Porous Graphite Anodes
A process for fabricating porous graphite electrodes having an average pore diameter of 21 μm and an open area of 1% was developed with a system constructed from a pico-second pulse laser and a polygon mirror. The fabricated porous graphite electrodes were used to evaluate the porous design on the graphite electrodes for exhibiting a higher Li+ pre-doping reaction (pre-lithiation) rate with cells in which graphite electrodes were laminated with separators and the laminated graphite electrodes opposite to a Li metal foil through a separator. The results in this study indicate that lithiation proceeds stepwise from the first electrode close to the Li foil to more distant electrodes. The transfer of Li+ ions controlled the lithiation because lithiation did not occur in areas of the electrodes that did not contain pores. In addition, the porous electrodes exhibited a much higher rate of lithiation when compared with electrodes that were prepared by coating a graphite layer on porous current collectors. WIRED Co., Ltd.