2021/7/6 / Last updated : 2021/9/8 wired Laser processing exampleMetalSheet Laser Example of grooving to tungsten (W) This is an introduction of counterbore (non-penetrating) processing examples for tungsten (W). Machining was performed with a groove width of 50 μm and a depth of 25 μm. Wired Co., Ltd.
2021/6/21 / Last updated : 2021/6/21 wired Laser processing examplematerialMetalSheet Laser Narrow pitch machining example for SUS Through holes with an output diameter of 8 μm (incident diameter of about 20 μm) and a pitch of 60 μm were machined on SUS 0.02 mm. At the visual level, distortion could be confirmed. Wired Co., Ltd.
2021/5/26 / Last updated : 2021/6/9 wired Laser processing examplematerialMetalSheet Laser Example of grooving to SUS This is an introduction page of grooving examples for SUS304. Wired Co., Ltd.
2021/5/26 / Last updated : 2021/11/15 wired Laser processing examplematerialResinSheet Laser Example of water-repellent effect on silicone rubber by nanosecond pulse laser This is an introduction page of laser microfabrication examples that are expected to have a water-repellent effect on silicone rubber by nanosecond lasers. Wired Co., Ltd.
2021/3/1 / Last updated : 2021/5/23 wired Laser processing examplematerialMetalSheet Laser Example of high aspect ratio laser penetration processing to SUS This page introduces examples of laser through-hole machining with a high aspect ratio (7.5) for SUS. Wired Co., Ltd.
