Single-wafer laser prototype processing machine
Wired currently has three types of flat stage drive single-wafer prototypes in addition to its own roll-to-roll film continuous processing prototype. In order to receive requests for processing tests on A4 size and small pieces of film before considering roll-to-roll processing, we have a single-wafer that combines three types of lasers and galvano mirrors. We have installed a processing machine and have a system in place to carry out initial processing studies at an early stage.
For this reason, it is possible to study processing from processing studies to small piece tests, and further to scale up to mass production, and we will fully support the consideration of mass production from the initial stage of development.
| L01 | H01 | P01 | |
| Equipment appearance |  |  |  |
| Processing range | 30 mm x 30 mm (Telesen) (Table operating range 300 mm x 300 mm) | 300 mm x 300 mm (table operation possible) | 150 mm x 150 mm (table operation possible) |
| Galbano | 〇 | 〇 | 〇 |
| Incident diameter | 10 ~ 15 μm | 50 ~ 60 μm | 20 ~ 25 μm |
| wavelength | 532nm | 1064nm | 355nm |
| Repeat frequency | 400, 500, 650, 800, 1000kHz | 15-300kHz (rated 50kHz) | 30-300kHz (rated 50kHz) |
Sheet laser machining example
Sheet Laser
Laser Processing Machine Manufacturing
We manufacture and sell roll-to-roll laser drilling machines equipped with our original optical system GHS (Grand Helical Scan).
Laser Technical Data
Introduces laser processing technology, treatises, and laser processing examples.
Notice
We will inform you about various information, media publication information and exhibition exhibition information.