Metal

The example of processing of metal of Wired Co., Ltd. is posted.

2023/7/4 / Last updated : 2023/9/12 wired
Composite materialLaser processing exampleMetalRoll to Roll

Laser cut shapes in any shape! Example 2: Half-cut on composite materials

Half-cutting is performed by cutting only Al foil of Al foil + PET laminate composite material to secure the shape. The desired shape can be continuously processed while the base material is conveyed roll-to-roll. We are capable of processing not only Al foil but also Cu foil and other composite materials and can manage a wide variety of materials and shapes. Damage to the PET material due to laser half-cutting is not a concern.
2023/7/3 / Last updated : 2023/9/12 wired
Laser processing examplematerialMetalRoll to Roll

No punching die required! Example of laser tab cutting on electrode foil

Tab cutting to electrode foil was performed by laser. Continuous processing is possible while transporting by roll to roll. Laser cutting is flexible in terms of shape and position. While tab cutting of electrode foil is generally performed by die punching, laser cutting can eliminate the need for die remaking or die maintenance due to shape changes
2023/5/19 / Last updated : 2023/9/22 wired
Laser processing exampleMetalResinRoll to Roll

Introduction of Selective Laser Punching Drawing Technology that is now controllable

In the hole punching technology with a diameter of 500 µm or more, which is a feature of the laser punching process technology, until now only high-speed batch laser continuous processing of film conveyed by roll-to-roll was possible. However, with the improvement of control functions, it is now possible to process any desired pattern on the film, enabling a variety of epoch-making patterns to be drawn. No need to make new plates or dies for each pattern.
2022/10/7 / Last updated : 2023/9/21 wired
Composite materialLaser processing examplematerialMetalResin

The latest laser high-speed decorative technology for laser and roll-to-roll production

Laser hole processing technology for roll-conveyed film has been considered a difficult technology because the optical scanning technology of the laser cannot keep up with the conveyor speed. Following the establishment of the converting high-speed laser technology with the GHS® scanner, WIRED has established the technology for drawing on films conveyed at high speed. Icons can now be clearly expressed with dots punched into the film conveyed at high speed.
2022/8/18 / Last updated : 2023/9/12 wired
Laser processing examplematerialMetalRoll to Roll

Astonishing one-time punching process with high-speed laser punches resin film and metal foil.

High-speed laser punching technology has been developed to process resin films and metal foils conveyed by roll-to-roll operation at remarkably high speeds. High-speed laser punching technology that performs optional hole processing (micro hole) up to φ1mm (larger diameter is possible by optical design) was developed by integrating our unique optical unit and roll-to-roll conveyor system.